BSFFL - U-24 LATEX
- MSDS: BSFFL
- Manufacturer: WESTPAC PRODUCTS CO INC
- Product Name: U-24 LATEX
- National Stock Number: 8010-00N040906
Product Identification
Product ID:U-24 LATEX
MSDS Date:04/14/1987
FSC:8010
NIIN:00N040906
MSDS Number: BSFFL
Responsible Party
OAKLAND, CA 94621
US
Emergency Phone: 415-632-3778
Info Phone: 415-632-3778
Cage: 4Z694
Contractor
Cage: 4Z694
Ingredients
ACRYLIC POLYMER
CAS: 25608-63-7
Fraction By Weight: 36%
DEFOAMER
Fraction By Weight: 0.5%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 63 - 68%
RESIDUAL MONOMER
Fraction By Weight: TRACE
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 0.05%
OSHA PEL 1 PPM; 2 PPM STEL
ACGIH TLV: 1 PPM; 2 PPM STEL
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT) >50 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL: PROLONGED CONTACT TO VAPOR/MIST
CAN CAUSE HEADACHES, NAUSEA & IRRITATION OF NOSE, THROAT & LUNGS.
SKIN: IRRITATION OF SKIN UPON REPEATED OR PROLONGED CONTACT. EYES:
CONTACT SLIGHTLY IRRITATING TO EYES.
Explanation of Carcinogenicity:FORMALDEHYDE: GRP 2A (IARC
VOL7,P211,'87); ANTIC TO BE CARCIN (NTP 6TH ANN RPT, '91); OSHA
(SUPDAT)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYES:FLUSH W/A LARGE AMOUNT
OF WATER FOR AT LEAST 15 MINS. SEE MD IF IRRITATION PERSISTS.
SKIN:WASH AFFECTED SKIN AREAS W/SOAP & WATER. INGEST:CALL MD
IMMEDIATELY (FP N).
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 212F. POLYMER
FILMS CAN BURN.
Accidental Release
Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. DIKE & CONTAIN SPILL W/INERT MATL (E.G.
SAND OR EARTH). TRANSFER LIQ TO CONTRS FOR RECOVERY OR DISP & SOLID
DIKING MATL TO SEPAR ATE CONTRS FOR DISP. KEEP SPILLS & (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STOR TEMP 140F MAX & 34F MIN. KEEP
AWAY FROM FREEZING; PROD MAY COAGULATE. MAINTAIN ADEQ VENT WHERE
PROD IS HEATED OR CURED.
Other Precautions:MONOMER VAPORS CAN BE GENERATED WHEN PRODUCT IS
HEATED DURING PROCESSING OPERATIONS.
Exposure Controls
Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
WEAR NIOSH/MSHA APPROVED OR EQUIVALENT RESPIRATOR SUITABLE FOR
CONCENTRATIONS & TYPES OF AIR CONTAMINANTS ENCOUNTERED.
Ventilation:LOCAL EXHAUST VENTILATION AT POINT OF CONTAMINATION.
MECHANICAL VENTILATION AT POINT OF CONTAMINATION ENCOUNTERED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEM WORK GOGG .
Other Protective Equipment:ADEQUATE SKIN PROTECTION.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC:CLEANING RUNOFFS OUT OF MUNICIPAL SEWERS & OPEN BODIES OF
WATER. CARCIN COMMENTS: REGULATED CARCINOGEN, 29 CFR 1910.1048,
1JUL92 .
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17 @ 20C
Vapor Density:< WATER
Spec Gravity:1-1.2 (H*2O=1)
pH:9.5-10
Evaporation Rate & Reference:LESS THAN WATER
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR.
Percent Volatiles by Volume:52-54
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:TEMPERATURES OVER 350F.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:COAGULATE THE EMULSION BY THE STEPWISE ADDITION
OF FERRIC CHLORIDE & LIME. REMOVE THE CLEAR SUPERNANT LIQUID &
FLUSH TO CHEMICAL SEWER. LANDFILL OR INCINERATE SOLID & CONTAMD
DIKING MATERIAL ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.